Vehicles
132 not categorized PORSCHE 996 USED CARCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.91133300902 Our rear spring plate set is manufactured to the highest of European standards to ensure the quality and performance you expect for your Porsche. The adjustability allows for precise re-indexing of the torsion bar 1 ½ inches up or down. New OEM spec. (65 shore) rubber bushings are installed to make this a direct bolt on without the hassle of adding new bushings. Each plate is clearly marked for indexing purposes and includes complete installation instructions. Features: made from ¼ inch spring steel adjustment range of 1 ½ inches up or down includes new OEM spec. (65 shore) rubber bushings clearly marked for accurate installation and indexing made in Germany sold individually. 2 necessary per car. Plea...(choose a part on the right to read more) View/Change Diagram
$363.00
Make a selection 91150318500 This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thinner width. This is not the thicker width from the SC models. View/Change Diagram
From $5.25
Make a selection DF991002 Dual friction is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control.,centerforce dual-friction pressure plates feature their patented centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the centerforce dual-friction disc has a full facing on the pressure plate side for drivability and longevity, while a carbon composite puc style (segmented) facing is used on the flywheel side for a positive engagement and increased holding-capacity....(choose a part on the right to read more) General Fitment911 1970-73911 1974-77 911 1978-83 911 1984-86
$2,894.77
Make a selection 911561005003AV This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a trapezoidal pvc plastic rear window with a zipper like the original. If the window gets hazy simply unzip, remove and add a new window. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. Sold individually. 1 necessary per car. For m...(choose a part on the right to read more) View/Change Diagram
From $1,410.20
Make a selection 91453152310 This is the domed polished screw that secures the outside mirror and is also used to secure the door catch in the jamb. It is also used to attach the exterior side mirrors to the car. This screw shows so it is necessary to have the polished domed variety. View/Change Diagram
$1.40
Make a selection 911561053003EQ Rear window cabrio top section, manufactured in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion, increased fade resistance and the tighter woven layers for the mechanically operated tops. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. Made in Germany. Sold individually. 1 necessary per car.
$984.50
Make a selection 911563051002EQ This is a complete cabrio top made in Germany with original sonnenland material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes a pvc plastic rear window like the original. Sonnenland material consists of 3 layers, dyed acrylic twill weave top layer, elastomeric rubber inner layer and polyester woven base layer. It provides increased strength against abrasion; increased fade resistance and the tighter woven layers are made for stronger frames. Sonnenland high quality material was originally used by Porsche and other top German manufacturers. This would replace original part # 911 563 051 00 2xw made in Germany. Sold individually. 1 necessary per car.
$1,992.10
Make a selection 914503908GT Our steel GT flares are exact duplicates of the real thing and give your car GT identity, as well as enabling 7 inch and 8 inch wheels to be installed! Easily installed by a competent body shop, you will love the look and the handling! we tried hard to exactly duplicate the factory flare and improve on it! we used the latest optical scanning technology (the same that scanned the new GT 40 for ford ) and found that the left and right original (we used an old factory original set loaned from our friends at brumos) not mirror images of one another! by combining the two programs, we were able to achieve exact mirror images for a perfect fit. you will love how easy they install. (see our web articles on instal...(choose a part on the right to read more) General Fitment914 1970-76
From $1,195.00
Make a selection 93012313404 This sealing ring is used to connect the wastegate pipe, part # 93012303100 to the muffler. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. View/Change Diagram
From $12.10
Make a selection CARP58T30FLAP Sport rear silencer for Porsche Cayenne 958 v6 / v6 dfi supercharged with integrated exhaust flaps to be used with either oe flap control(if available) or with cargraphic's optional performance flap control system. General FitmentCAYENNE 2011-14
$5,190.08
Make a selection 99903106102K This kit contains head nuts and small style washers; used for 2.0-2.7l engines.
$56.17
Make a selection 93010399001 The name mahle is synonymous with both Porsche and performance. From the engineering of the world’s first aluminum alloy piston, to the development of the nikasil coated cylinders (nikasil is the wear-resistant cylinder coating now used throughout the industry), the mahle tradition powers not only Porsche street cars, but also today’s most advanced Porsche racecars. If you want more horsepower out of a daily driver, or ultimate performance for a full-on racecar, mahle pistons and cylinders can handle it. These cylinder and piston sets feature nikasiltm coated cylinders which reduce wear and a matched aluminum piston in several different compression rations. Includes rings and wrist pins. View/Change Diagram
From $656.76
Make a selection 93060610500ATK The remanufacturing process includes full inspection to ensure proper operation after the remanufacturing process. We then disassemble, clean, degrease and rebuild to factory specifications. Remanufacturing is done in Germany, so the lead times can vary. Send us your original warmup regulator and we will have it remanufactured for you. We do not offer a core exchange on this part. Please note: please package your part as carefully as possible to ensure that damage is not caused en route to us.
$744.70
Make a selection 94463190500 European flachbau / slant nose models came with this position light. It sits just inside of the front turn signal. They suffer from cracks caused by road debris, and should be replaced as soon as a crack is noticed. Replace yours with this high-quality hella replacement. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: bulb is not included, please order part # 90063110590 separately.
From $11.85
Make a selection 96382 Porsche;s launch of the GT3 line marked the return of the purpose built street/track car designed to provide the ultimate Porsche driving experience. The hardcore track focus of the GT3 is reminiscent of the legendary rs line that helped make Porsche famous with driving enthusiasts around the world. General Fitment911 1998-05
$1,208.25
Make a selection 96433102100RATK Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)
$672.10
Make a selection 96437504381 Replace your worn-out, original soft rubber engine mounts with our higher density, rs specification rubber bushing. This is manufactured of rubber with a 75-shore hardness value. 75-shore is the same density as what is used in the rs models. It is more durable, provides more positive, sharper shifts and offers crisper throttle response. Yet, rs spec rubber is still quiet and comfortable for street use. Features: sharper shifts crisper throttle response does not produce nvh (noise vibration harshness) like teflon or solid bushings rubber has a shore hardness value of 75 (like rs models) made in Germany this mount is a high-quality OEM (original equipment manufacturer) replacement part, designed to perform like t...(choose a part on the right to read more)
From $199.99
Make a selection 9712 These chrome lug nuts feature a 60 degree conical seat. 14 mm x 1.5 thread pitch. These lug nuts must be used with the EMPI gas burner style wheels for proper fitment. Sold in a set of four, four sets needed for entire car. General Fitment914 1970-76
$18.81
Make a selection 9906POV Manufactured from vorsteiner's factory with their trademark vacuum forming production process. Hand made with only the highest quality materials used. This newly developed high tech composite production processes called dry vacuumed woven plastic (dvwp) is to replace wetlay up fiberglass and fiberglass reinforced plastic materials. Dvwp is formed using a high compression vacuum process much like the dry carbon fiber production process, to produce multiple layers of air tight composite sheets that are impregnated and bonded with the resins to create a tight and strong chemical bond. General Fitment911 TURBO/GT2 2007-09
$3,712.84
Make a selection 99110613802 The radiator is a critical engine component that needs to be inspected and cleaned of debris to keep them functioning efficiently. If damage is noticed, replace it with this hello OEM high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We recommend replacing the upper and lower rubber mounts, part # 99110653701 and 99110653802 sold individually. 1 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment. This part is the latest supersession and can also be used in place of part number 991 106 138 01.
From $1,042.80
Make a selection 99317413 This circular high-flow air filter is made to be used with weber 34 idf carburetors found in the redline/weber carburetor kit, part number rk1412. General Fitment912 1965-69914 1970-76
$15.50
Make a selection 99217473 This rectangular high-flow air filter is made to be used with weber 32/36 dfev carburetors found in the redline/weber carburetor kit, part number rk297. General Fitment914 1970-76912 1965-69
$24.00
Make a selection 99335140787 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection 99335140887 This was the rotor used on the 964 cup / rsr / 964 cup / rsr / 993 cup / rsr / GT2 evo. This disc is a genuine motorsports replacement part. It is drilled and vented. Sold individually. The corresponding right side is part # 99335140887 all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$721.60
Make a selection 996MIDCAT Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles. General Fitment911 1998-05
$1,957.50
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |